Feed: Clutch Tools - AggScore: 14.1

Swisher T2066 66-Inch 20 HP Trailmower Review

---

Average Reviews:

(More customer reviews)I reviewed all of the available pull behind mowers, and I chose the swisher because it was the widest with the most HP that I could find.Also, I was close to buying the Agri, but those folks couldn't tell me where to buy one, as Sears was out of stock on them.

For the money, this unit is rugged.I did, however, break the drive belt the first day out on it.Probably user error, as I had the tension too tight on that belt.

I rate it a 4 out of 5 because it is a bit loud when it bounces around, if you dont have a real smooth lawn.But I am putting it to the extreme, cutting a large area (4 acres) with various slopes, using a Polaris 425cc ATV.

Click Here to see more reviews about: Swisher T2066 66 Inch 20 HP Trailmower

Product Description:
The Swisher 66-inch 20 HP finishing Trailmower is designed to dramatically reduce mowing time. This mower attaches to your ATV, lawn tractor or other utility vehicle and is the ultimate time-saver for large lawns and meadows with grass up to 5 inches in height. The T-66 Trailmower offers 66 inches of mowing pleasure and a powerful 20 HP Briggs & Stratton engine. It features three blades, a true floating deck, a 12-volt electric starter (battery not included), and an exclusive bumper roller system that protects your trees and shrubs.

Get 23% OFF

Want to read more honest consumer review about Swisher T2066 66 Inch 20 HP Trailmower now ?

Troy-Bilt 25B-554E066 158cc Briggs & Stratton 500 Series Gas-Powered Lawn Edger with Curb Wheel Review

---

Average Reviews:

(More customer reviews)I just purchased a Troy-Bilt 4HP triple blade Edger at Lowes yesterday.The unit edges well.We have a long driveway (500 ft.) with lots of curves, and I believe we can keep grass from growing into the driveway with this unit.On the downside, I've only tried to start it a couple times, with poor success both times.Right out of the box, it took about 15 pulls to start the first time.After running for several minutes, I released the safety bar, which kills the engine (there is no clutch to stop the blade... releasing the bar kills the engine).Then, with the engine already warm from just runing, it took another 10-15 pulls to re-start.The unit has no choke, only a primer bulb which I believe contributes to hard starting.Zapped by "big brother" again!

UPDATE: After using this edger for about 2 months, I believe my rating to be a little to hard.The problem is that the number of pump primes needed to start the machine cold is considerably more than stated in the instructions, at least on my edger.The instructions written on the edger say to pump it 3X.The instructions in the users manual say to pump the primer 6X.By experience, I've learned that if I pump it 12X, it usually starts on the first pull.As long as I know this, it is not really a problem.Our driveway is 450 feet long, so requires 900 feet of edging total (because there are two sides).The edger does a good job.However, it will only dig a maximum of 2 1/4".This is lower than other edgers I've used. Because the edge of our drive is higher than the ground, if I edgw with the wheels on the hard driveway surface per the instructions, I can only dig less than an inch deep.If I want to edge deeper (up to 2 1/4"), I have to have the wheels on the ground.This is contrary to the instructions, but works.Because I'm satisfied with the edger, and have overcome the initial starting problem, I would change my rating to a 4.0 if amazon allowed that.

Click Here to see more reviews about: Troy-Bilt 25B-554E066 158cc Briggs and Stratton 500 Series Gas-Powered Lawn Edger with Curb Wheel

Product Description:
TROY-BILT" EDGER/TRENCHER 4.0HP B&S 9" steel blade with plastic blade guard 6 position from 1/4" to 2" Trenching kit included 2 year limited warranty Boxed

Want to read more honest consumer review about Troy-Bilt 25B-554E066 158cc Briggs and Stratton 500 Series Gas-Powered Lawn Edger with Curb Wheel now ?

Lisle 64250 Right Angle Ratcheting Screwdriver Review

---

Average Reviews:

(More customer reviews)The acrylic head on the bits are too big--if you need this for PC or electronics repair, forget it.The acrylic heads don't help you much because they're so thick--in any spaces smaller than 3", you might as well have a full-size screwdriver, because this fat-headed thing won't fit.Tried drilling and breaking the acrylic, but it's much too strong, and as a result, 15 bucks was wasted on this thing.The finish and construction was decent, but the little rods inside mine that make the ratcheting action started falling out rather quickly in the other uses I had for the tool.Look elsewhere, there are better right-angle tools.

Click Here to see more reviews about: Lisle 64250 Right Angle Ratcheting Screwdriver

Product Description:
Lisle right angle ratcheting screwdriver can be used where a screwdriver won't fit. It makes it easy to remove and install molding around fender wells and other tight places. Place handle over the bit ad turn, reverse the handle on bit to tighten. It can also be used with a 1/4" round shaft screwdriver.

Get 22% OFF

Want to read more honest consumer review about Lisle 64250 Right Angle Ratcheting Screwdriver now ?

Poulan ES350 16-Inch 3.5 HP Electric Chain Saw Review

---

Average Reviews:

(More customer reviews)This is a good chainsaw.I have only used it about 3 hours, so any reliability or wear issues are moot at this point.The best feature -- trivial, but you can see how much bar oil is remaining through the side of the saw.

My first chain saw was an antique McCullouch with a 24 in. bar that weighed about 20 lbs.I learned a lot from it, especially that light weight chainsaws are safer than heavy ones.

My second chain saw was a HomeLite E-Z 16" that was recommended by someone who once rented chain saws.It weighed about 10 lbs and cut fire wood for my stove for 15 years.I literally used this saw up, but it would still crank and cut wood when I got rid of it.

What I learned from these two saws is that the most dangerous thing to do is to try and cut a limb or log above your head.The saw will fall onto your thigh.The lighter the saw, the less likely it is that this will happen in an uncontrolled fashion.

My next saw was a saw that a professional tree cutter took up a 90 foot tree and topped it with the saw supported by his fully extended arm.I won't name the brand because it was a real mess on the ground, leaking bar oil all over the place in spite of repeated attempts to have it repaired.

Now I have this Poulan ES-350.I got it because I am too old to go deeper than an extension cord into the woods, and I am tired of the hazards and frustration associated with cranking the gas models. The electric is light weight, and I have been able to easily saw through 12 in. green maple logs.It isn't as fast at cutting as the above three saws, but it is light enough that one can safely cut at extended arm lengths (if one is careful).

A word about chains.The Poulan comes with a "low kick back" chain.I don't know why they make them, probably some regulatory-liability thing, because no chainsaw is kick-backproof, so Beware!.At any rate, I have read reviews of the replacement chain for this saw saying the the chains don't last.I have been unable to identify a chain that isn't "low kick back" for this saw, so I will use the Poulan replacement chain (after sharpening the original for a year or so).The main reason a chain goes dull is that it hits dirt, sand, rocks or wet wood.You can feel the sharp edge of a cutter blade just as you can feel the sharp edge of a knife. If it feel smooth, instead of "grabbing" your finger, it needs sharpening.

A word about extension cords.The hidden cost of this saw is a 100 ft. 14 gauge extension cord (most of the ones you have at home are probably 16 guage - not big enough).This brings the total cost of the saw to around $125, compared to $250 or even $350 for the gasoline saws I mentioned above.I don't recommend the following, but I have heard that this saw can run with 150 ft of 14 ga. extension cords.I REALLY don't recommend this, but I have heard that the saw can run with a 100 ft. 12 guage cord plugged into the wall, and 150 ft. of 14 guage exetension cords plugged into the 12 guage cord.(The longer the cord, the more likely you are to cut through it.)


Click Here to see more reviews about: Poulan ES350 16 Inch 3.5 HP Electric Chain Saw

Product Description:
The Poulan 16-inch, 3.5 HP electric chain saw is perfect for light cutting jobs around the yard, with a cutting capacity of 32 inches diameter. It is powerful enough to fell trees but light enough to prune and trim.The auto-oiling system keeps the 16-inch steel bar and chain fully lubricated. For safety, the inertia-activated chain brake stops the rotation of the chain should kickback occur. The unit comes fully assembled and includes a 1-year warranty.

Want to read more honest consumer review about Poulan ES350 16 Inch 3.5 HP Electric Chain Saw now ?

Milwaukee 0724-24 28-Volt V28 Lithium-Ion 1/2-Inch Cordless Hammer Drill/Driver Kit Review

---

Average Reviews:

(More customer reviews)I've used Milwaukee's 18v drill for years (I own two of them) and they've never failed me. By far, the best cordless drill available... until now. When Milwaukee came out with their V28 line, I was intrigued, but I didn't need a new drill. Besides, the 18v drill I had worked fine, I didn't think it was necessary to upgrade (especially for the price). When it came time to buying a hammer drill, I looked again at the V28 hammer-drill and decided to buy one, figuring it would at least allow me to combine two tools into one and save the room in my car. I ended up getting a LOT more then I expected.

First, the belt clip is amazing. I didn't think twice about it when I read the drill's description, since I have a holster that works fine. The holster's now in the garbage as the belt clip is absolutely ingenious. Now I can easy attach the drill to my belt without looking and it's fully secure. With one hand I can push down on the latch and detach the drill for use... a marvelous idea. Best thing about it is I can also use it with my V28 flashlight when I need to.

Another thing I really like about this new drill is the bit holder... I always liked the idea of DeWalt's drill's holding the single bits, but Milwaukee provides a place for two. However, the only downside to this is if you use the drill in the hammer-drill setting, the bits tend to slide out after prolonged use.

Then there's the power... one of my first uses was drilling a 1" hole at an angle through two old 1x10 joists and a 2x4 in order to run a wire. I've done it several times with my old 18v, but I always end up having to reverse back a bit then start again to get a bit of momentum. If I can, I normally leave the job up to a corded drill to make things nice a quick. Not anymore... the V28 ripped right through the wood without the slightest problem. The power difference between the 18v and the V28 is shocking... you'd think you were using a corded drill.

The hammer-drill function was another big plus for me... I used this drill side by side with another corded Milwaukee hammer drill to drill numerous holes into a concrete foundation. The cordless worked just as well as the corded... no difference at all, except I wasn't lugging around a cord.

Lastly, there's the longevity of the charges... usually I'll go through at least one full battery and charge it on the site. Again, not anymore. I rarely need to use the second battery during a single day.

If I could, I'd give it six-stars. This thing is just incredible.

Click Here to see more reviews about: Milwaukee 0724-24 28-Volt V28 Lithium-Ion 1/2 Inch Cordless Hammer Drill/Driver Kit

Product Description:
Sporting the longest running 28-volt hammer drill on the market, Milwaukee's V28 lithium-ion cordless kit is always charged up for the beefiest drilling and driving applications. The tool switches easily between drill, drive, and hammer modes for less downtime and smoother transitions between tasks. This ½-inch hammer drill cranks out a whopping 600 inch-pounds of torque for drilling large holes and driving heavy bolts for deck support, playground equipment, and post-and-beam construction. The two variable speeds do it fast, too, spinning along at 0-600 or 0-1800 rpm's for more productivity.
Powering the V28 is Milwaukee's revolutionary 28-Volt Lithium-Ion battery pack. The 28-volt battery pack weighs less than an 18-volt NiCad pack yet delivers twice the runtime. And, a patented battery design lets you insert the battery in the reverse position for optimal balance when working overhead or in hard-to-reach areas.
The V28 hammer-drill comes standard with a ½-inch all-metal, single-sleeve, ratcheting chuck with carbide jaws that keep bits from falling out or slipping. A comfortable non-slip, soft-grip handle reduces vibration and fatigue. For easy transport and access, Milwaukee's patented Clip-Lok system attaches the tool securely to the operator's belt or tool bag and easily releases with one hand-a boon for ladder work where there's is nowhere safe to rest the tool. Milwaukee cover's this kit with a 5-year warranty. --Brian Olson
What's in the Box
28-volt hammer drill, two 28-volt batteries, 1-hour charger, carrying case, Clip-Lok System, side handle and No. 2 Phillips bit

Get 24% OFF

Want to read more honest consumer review about Milwaukee 0724-24 28-Volt V28 Lithium-Ion 1/2 Inch Cordless Hammer Drill/Driver Kit now ?

Husqvarna 455 Rancher 20-Inch 55-1/2cc 2-Stroke Gas-Powered Chain Saw Review

---

Average Reviews:

(More customer reviews)I just picked up a 455 Rancher about a month ago (today is 4 May, 2006). This is a great saw. I had been using for more than 20 years, and still use to some degree a Stihl 028; another excellent saw.

There are some pros and cons to this saw as with all things.

Here's what I like. It's easy to operate and maintain. Accessibility of the under-cowel components such as the air filter, spark plug, and clutch housing is a no-brainer. It starts easy. In fact, you really don't need the pressure valve. It "pops" after a few short and fast pulls. Remember, once the saw "pops" with the choke, un-choke it and pull it again. You do not need to warm a two stroke with the choke on like you would a 4 stroke engine. Attempting to warm with the choke is the biggest cause of two stroke engine flooding.

Here's what I do not like. The low/hi mixture settings are limited by EPA regulations; a complete and total joke. If you remove the controls to optimize your settings, the warranty is void. But, I think it's better to do that than cook engine from lean settings. There aren't enough chainsaws running in any given period of the day to justify this regulation. So if you are a casual user, really pay attention to the break in procedures. Since the saws run lean, you need to make sure to break them in with extra care. If you use them much more frequently, remove the EPA limiters and richen out the hi/low mix, otherwise you will cook your engine.

Overall this is a great saw. The chisel chains do well for heavier applications. Be careful of kickback with these style chains. You can get low-kick back chains from any dealer. It's all a matter of personal preference.

I have outfitted my saw with an Oregon 20" Bar, chain, and rim sprocket.Once again this is a personal preference issue. The power head of the 455 is plenty and the applications many. If you are a causal user of this saw, talk with the folks at the saw shops for tips and ideas. They are a repository of knowledge and can help you make informed decisions about your saw.

-Washington State

Click Here to see more reviews about: Husqvarna 455 Rancher 20 Inch 55-1/2cc 2-Stroke Gas-Powered Chain Saw

Product Description:
Husqvarna, 455 Rancher, 20" Gas-Powered Chainsaw, 3.4CUIN (56CC), 2 Cycle Engine, Dual Action Chain Brake & LowVib Features For Added Safety & Comfort, Air Injection System, SmartStart Provides Easy Starting, Lightweight At Only 12 LB, Pro/Commercial Grade Quality, 2 Year Warranty Consumer Use, 90 Day Warranty Pro/Commercial Use.

Want to read more honest consumer review about Husqvarna 455 Rancher 20 Inch 55-1/2cc 2-Stroke Gas-Powered Chain Saw now ?

Troy-Bilt TB10CS 17-Inch 31cc 2-Cycle Gas-Powered Curved-Shaft String Trimmer Review

---

Average Reviews:

(More customer reviews)I purchased this trimmer to replace my electric trimmer that was falling apart.The directions are straight-forward, and assembly was simple.Starting the trimmer for the first time took several tries, but eventually fired right up.
Moving from an electric trimmer to a gas trimmer is quite a change.The Troy-Bilt has dual-trimmer ends, and rotates much faster.It weighs quite a bit more than the electric, naturally, which is really the only downfall, outside of the edge guide.The edge guide is a bit awkward, since it is a rotating wheel.It is a bit bulky and makes it hard to judge the true length of the strings.
Overall, especially for the price, you can't beat this trimmer.I would recommend it to anyone with a moderate sized yard.

Click Here to see more reviews about: Troy-Bilt TB10CS 17 Inch 31cc 2-Cycle Gas-Powered Curved-Shaft String Trimmer

Product Description:
The Troy-Bilt 31 cc 2-cycle gas trimmer with 17-inch cutting swath and edge guide features convenient EZ-Start choke technology, which allows the user to simply flip the choke, prime the engine, and then give a slow, smooth, easy pull for a guaranteed start. The EZ-Start technology allows the trimmer's engine to engage with 55-percent less effort than most gas models. With its rugged 31 cc engine, the trimmer provides plenty of brawn to power through the most ragged, overgrown growth. The trimmer's professional-style curved-shaft design gives easy access underneath low-growing shrubs. The trimmer cuts in a 17-inch radius and features heavy-duty, 0.080-inch dual lines with convenient bump-head line release.
When it's time to replace the line, the line replacement system is exceptionally easy to load and rewind, all without removing the spool or taking it apart. The entire trimmer feels exceptionally balanced and comfortable in the hand, and the ergonomic soft-grip D-shaped handle easily adjusts for both right and left-handed users. The trimmer comes with all the necessary oil for immediate operation, and is covered by a 2-year limited warranty.

Get 2% OFF

Want to read more honest consumer review about Troy-Bilt TB10CS 17 Inch 31cc 2-Cycle Gas-Powered Curved-Shaft String Trimmer now ?

Yard Machines 3100M 17-Inch 31cc 2-Cycle Gas Powered Curved Shaft String Trimmer Review

---

Average Reviews:

(More customer reviews)For the money, the trimmer is a good value. It was a little rough at start-up for the first time, but the more it is used, the more smoothly it runs. I bought mine for about $53.00 and got free shipping. It is a refurbished trimmer.

Click Here to see more reviews about: Yard Machines 3100M 17 Inch 31cc 2-Cycle Gas Powered Curved Shaft String Trimmer

Product Description:
The Yard Machines 31cc 2-cycle non-clutch curve shaft gas trimmer includes a dual line bump head, 2-cycle gas engine with chrome plated cylinders, and EZ Pull starting system. This non-clutch curve shaft gas trimmer also includes an adjustable D-handle for easy use. It is backed by a 2-year limited manufacturer's warranty.

Get 7% OFF

Want to read more honest consumer review about Yard Machines 3100M 17 Inch 31cc 2-Cycle Gas Powered Curved Shaft String Trimmer now ?

BOA BO17001 Grabit Screw Extractors Review

---

Average Reviews:

(More customer reviews)These work great and have saved me hours of work and frustration taking out stripped machine screws and woodscrews in hard wood. They're a bargain.

Click Here to see more reviews about: BOA BO17001 Grabit Screw Extractors

Want to read more honest consumer review about BOA BO17001 Grabit Screw Extractors now ?

Nocord Digital Torque Control Wrench DigiWrench WWT-1430 Review

---

Average Reviews:

(More customer reviews)Excellent product. I just changed all my wheels (took of winter tires), and this made it easy. The torque control seems to work fine (I'm not sure how I'd actually check that it was correct though.. but it seemed consistent across all the wheels).

One thing I suggest, is get some paper towels, and put them over your wheel nut, before pushing the wrench onto the nut. This will protect your wheel nuts from scratches.
I found when I just used the wrench bare, it left scratches on my wheel nuts due to the force with which it was "hammering" them loose/tight. The paper towel solved the problem. Definitely not a reason not to purchase this.

Click Here to see more reviews about: Nocord Digital Torque Control Wrench DigiWrench WWT-1430

Product Description:
Digital Wrench, with its patented Anti-Clutch system and digital torque control eliminates the hassle of loosening and tightening lug nuts, even those that have been tightened by a mechanic or at the factory. With the help of digital readout screen, control the amount of torque you need up to 250ft/lbs and you can easily tighten or loosen your lug nuts. The DigiWrench, a Digitally Controlled 12 Volt DC DIY Impact Wrench, is the only impact wrench of its kind in the world, allowing you to digitally select your desired amount of torque. This torque wrench has a 1/2" drive 250 Ft-lbs ratio. With 4 socket sizes, you don't have to worry about it being a perfect fit. The sockets themselves are specially designed to compensate for over and under tightening. The patented digital torque control with LED display will allow you to easily adjust the torque settings according to your needs. The Patented clutch system works to prevent backlash and to reduce overall power consumption. And just in case, nut wrench comes with a replacement fuse. This torque control wrench is dark grey in color and comes in blow mold case.

Get 36% OFF

Want to read more honest consumer review about Nocord Digital Torque Control Wrench DigiWrench WWT-1430 now ?

Chalk Holder Combo Pack - Commando Anodized Pro Series Handles (1each Clear, Gold & Blue Anodized) with One Piece colored or white Standard 3/8" School Chalk in Each Holder - SAVE 5% and Receive FREE Fluorescent HighLighter Review

---

Average Reviews:

(More customer reviews)If the chalk breaks, which happens easily against the metal edges, especially in the hands of enthusiastic junior high students doing board races, you have to unscrew the top and use the edge of a paperclip, or other sharp, thin object, to push the chalk up so that it can be used again.This tool is much sturdier than the plastic variety, but doesn't have the button on bottom that you can push for easy chalk release and refill.

Click Here to see more reviews about: Chalk Holder Combo Pack - Commando Anodized Pro Series Handles (1each Clear, Gold and Blue Anodized) with One Piece colored or white Standard 3/8 School Chalk in Each Holder - SAVE 5% and Receive FREE Fluorescent HighLighter

Product Description:
SPECIAL OFFER VALUE PACK, Save 5% + Receive free High Lighter. Three Chalk Holders: 1 each of Pro Series Clear, Gold & Blue Anodized Bodies with one pieces of standard colored or white 3/8" Diameter Chalk in each holder. PLUS receive a Free Fluorescent HighLigher. Handle has Non-Slip Finger Grip surface on body and chuck nut for better control when writing and aids in removing or replacing chalk. Hole in top of handle for easy removal of broken chalk. Made In USA. (Des.Pat.No. D416,777) >>> SUGGESTED USES: Helps prevent broken chalk and a convenient way to firmly hold chalk and keep hands free of chalk dust. Makes a great Gift.

Want to read more honest consumer review about Chalk Holder Combo Pack - Commando Anodized Pro Series Handles (1each Clear, Gold and Blue Anodized) with One Piece colored or white Standard 3/8 School Chalk in Each Holder - SAVE 5% and Receive FREE Fluorescent HighLighter now ?

Bare-Tool Makita BTP140Z 18-Volt LXT Lithium-Ion Cordless Hybrid 4-Function Impact-Hammer-Driver-Drill (Tool Only, No Battery) Review

---

Average Reviews:

(More customer reviews)I bought this Tool about 1 year ago and used it only 10 times. It already broke, I can't change gears anymore.
Now I have to deal with the warranty what is long enough but I would never buy that tool again. I got most of the other LXT series and I am very happy with them. The hammer drill is great. The other impacts drills are great, too. The saws and grinder are great as well.
But don't, don't, don't waste your money for the hybrid drill, you will have a hard time finding all the bits you need for drilling in concrete, the only way is with special adapter chucks and than you are right back with a normal drill.It really doesn't work as good as advertised.
But I give 5 Stars to the rest of the Series LXT. I am a big fan of Makita battery tools.

Click Here to see more reviews about: Bare-Tool Makita BTP140Z 18-Volt LXT Lithium-Ion Cordless Hybrid 4-Function Impact-Hammer-Driver-Drill (Tool Only, No Battery)

Product Description:
Makita's 18V LXT Lithium-Ion Cordless Hybrid 4-Function Impact-Hammer-Driver-Drill provides four functions in one tool. The versatile BTP140Z can drive lag bolts, drive screws with clutch settings, drill into concrete, and drill into wood, metal and plastic. It is a four-in-one tool for any professional who requires cordless product with best-in-class engineering.


View largerBTP140Z Features4-FUNCTIONS - Impact Driver, Hammer Drill, Driver and DrillVERSATILITY - Drills concrete/wood/metal and drives screws with clutch settingCOMFORT - Less weight with ergonomic gripPERFORMANCE - LXT Li-Ion batteries charge in 30 minutes, run longer and deliver 2.5X more cyclesBattery and charger not included
Tool SpecificationsHex shank1/4"Impact maximum torque1,240 in.lbs.Impacts per minute0-3,200 IPMNo load speed0-700, 0-2,300 RPMBlows per minute0-27,600 BPMBattery18V LXT Lithium-IonOverall length7-3/8"Net weight3.9 lbs. (w/battery)Makita-Built Motor Engineered for Versatile Power
The BTP140Z features a Makita-built four-pole motor that delivers 1,240 in.lbs. of Max Torque in a compact size. The BTP140Z has 16 clutch settings and two speeds with 0-700 RPM in low and 0-2,300 RPM in high. For drilling into concrete and masonry, the BTP140Z delivers 0-27,600 blows per minute (BPM). In impact mode, the BTP140Z has 0-3,200 impacts per minute for a range of fastening tasks. Makita's proprietary hammer and anvil impact mechanism is manufactured using the best raw materials with the highest quality steel and unique heat hardening process for maximum fastening and driving power.
Ergonomic Design in a Compact Size
The BTP140Z weighs just 3.9 pounds (with battery, sold separately) with a more compact design at 7-3/8 inches long and an ergonomic shape that fits like a glove for reduced operator fatigue. The BTP140Z is also equipped with a phosphorescent bumper ring for quick location in dark spaces, and a built-in L.E.D. light to illuminate the work surface for more efficient work.
Versatile Design for a Range of Applications
The BTP140Z is an all-in-one tool for any professional who requires cordless product with best-in-class engineering. It is engineered for drilling, driving, and fastening into wood, metal, steel, concrete, and plastic. The BTP140Z is ideal for HVAC, electricians, plumbers, masons, woodworkers, remodelers, and any pro contractor who requires a best-in-class engineered cordless impact-hammer-driver-drill for a range of tasks. The BTP140Z is just another example of Makita's commitment to innovative technology and best in class engineering.
About Makita's 18V LXT Lithium-Ion Cordless Tool Series
As one of the pioneers driving the cordless tool revolution, Makita changed the game with its breakthrough 18V LXT Lithium-Ion Cordless Series. Three years after its debut, Makita's LXT Series has grown from seven to over 35 tools, providing a wide range of cordless solutions for professional tradesmen. Makita also added 18V Compact Lithium-Ion for cordless power in a more compact size. Makita's 18V Lithium-Ion batteries and ENERGY STAR rated Optimum Charging System provide several benefits over old battery technology. When compared to traditional 18V Ni-Cd batteries, Makita's 18V Lithium-Ion batteries have 40% less weight, longer run time, and five-times lower self-discharge to keep cells active and ready to use at any time.
Makita's 18V Lithium-Ion battery delivers 2,000 cycles--2.5X more than Ni-Cd. In addition, built-in shock absorbing features help protect the battery, and sixteen firm-holding contact terminals deliver constant high power. During the charging process, a built-in memory chip in the battery communicates with the Optimum Charger for a more efficient charge, extending the battery life. Makita's Optimum Charger is also faster: it will charge an 18V LXT Lithium-Ion battery in just 30 minutes, and an 18V Compact Lithium-Ion battery in only 15 minutes. Makita also offers a Rapid Automotive Charger for 18V LXT and 18V Compact Lithium-Ion batteries that plugs into 12V DC sockets equipped in most automobiles and trucks for added mobility. Makita's growing line of LXT cordless tool solutions features a wide range of industrial-quality power tools, including driver-drills, impact drivers, impact wrenches, saws, grinders, screwguns, rotary hammers, and more. The LXT Series also offers a jobsite radio, rechargeable flashlights, and several different combo kits.
About Makita
Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.
Warranty
Every Makita Lithium-Ion tool is backed by Makita's 3-Year Warranty that covers repair due to defects in materials or workmanship up to three years from the date of original purchase. Makita Lithium-Ion batteries and chargers have a limited 1-year warranty. Please see makitatools.com for complete details.
What's in the Box
Makita BTP140Z 18V LXT Lithium-Ion Cordless Hybrid 4-Function Impact-Hammer-Driver-Drill (tool only).

Other Makita Lithium-Ion Series More 18V Lithium-Ion Tools from Makita
See the entire 18V Lithium-Ion LineupDriver-DrillsImpact DriversImpact WrenchesBHP454BDF451BDF452BDA350BTD144BTW450BTW251BTL063ConcreteMetalworkingCombo KitsBHR240BCS550BPB180LXT1500 15-Tool KitLXT1200 12-Tool KitLXT902 9-Tool Kit

Get 55% OFF

Want to read more honest consumer review about Bare-Tool Makita BTP140Z 18-Volt LXT Lithium-Ion Cordless Hybrid 4-Function Impact-Hammer-Driver-Drill (Tool Only, No Battery) now ?

Poulan P4018 18-Inch 40cc 2-Cycle Gas-Powered Easy Start Chain Saw with Case Review

---

Average Reviews:

(More customer reviews)I bought this saw for general use around my yard. For the money, its a great saw. I used it all day yesterday and it ran great. The only flaw I found was a cheap pull-cord setup that you need to be careful with. The pullcord housing and fly-wheel is all made of plastic...so I can tell Ill have to replace that at some point. Other than that, the saw runs great, and does a great job. FYI the saw does NOT come ready to go. Make sure you tighten the bar support bolts and add all the fluids. Great saw just to have at the house for occasional use.

Click Here to see more reviews about: Poulan P4018 18 Inch 40cc 2-Cycle Gas-Powered Easy Start Chain Saw with Case

Product Description:
Wild colors and superb performance system helps tame any cutting task. SuperClean? engine performance system for increased power, longer air filter life and reduced fuel consumption. Features easy starting, 18in. bar length, wide handle spacing and gear-driven automatic chain oiler. 2.5 cu. in. engine. Fully assembled; includes carrying case and cutting chain. U.S.A.

Get 4% OFF

Want to read more honest consumer review about Poulan P4018 18 Inch 40cc 2-Cycle Gas-Powered Easy Start Chain Saw with Case now ?

Husqvarna 240E 16-Inch 38.2cc 2-Stroke Gas-Powered Chain Saw Review

---

Average Reviews:

(More customer reviews)I would give the saw an overall B- rating.The positve: It starts fairly easily if starting steps followed properly -- read them, follow them.It is light enough for the average home user. The engine seems pretty solid and I cut 1 cord of wood with the saw (for cutting wood, this saw is too small, but did actually do the task). The negative: the plastic toolless blade adjuster works ok, but seems weak and will break any minute.It worked sorta ok for me, but not great.The oiler didn't work so good after a few hours of use and should be cleaned often.

Overall the saw would be good for a home user that needs to cut 4 inch limbs and the occasional 6-10 tree.Follow instructions for starting and keep the chain well oiled, even if the oiler gets gunked up.

Click Here to see more reviews about: Husqvarna 240E 16 Inch 38.2cc 2-Stroke Gas-Powered Chain Saw

Product Description:
Designed to fit the needs of homeowners and do-it-yourselfers, the Husqvarna 240E Gas-Powered Chainsaw specializes in light cutting and finesse-oriented tasks. Ideal for yard maintenance, tree trimming, and hobby work, this two-horsepower chainsaw features an ergonomic design and cutting-edge technology that help minimize emissions and maximize efficiency.

The Husqvarna 240E Gas-Powered Chainsaw
At a Glance:

LowVib technology reduces vibration and lessens fatigue. View larger.
A centrifugal air cleaning system removes large debris before it reaches the air filter. View larger.Powerful 1.8HP X-Torq Engine Keeps Emissions Low
The 240E delivers 1.8 horsepower, making it well-suited for medium-duty jobs, such as pruning or domestic cutting. The engine features Husqvarna's special X-Torq technology, which reduces emission levels by up to 60 percent and fuel consumption by up to 30 percent, so you'll be able to harness the power of a gas-powered chainsaw without having to worry about heavy pollutant output.
Durable Engine Built for Long Life
The 240E's engine has been built to withstand years of use. It uses a three-piece crankshaft, which has been forged and compressed for superior durability. Also, the chainsaw's centrifugal air cleaning system helps preserve engine life by removing harmful debris before it reaches the filter.
Easy, Effortless Startup
With the 240E, you won't have to waste precious minutes trying to start the engine. The chainsaw uses a combined choke/stop control, which allows for easy engine starting and reduces the risk of flooding. It also has a specially optimized fuel pump, which keeps the fuel lines clear and helps facilitate startup.
Ergonomic Design Reduces User Fatigue
The 240E has a lightweight frame that minimizes strain on your body, even after extended use. The chainsaw's shape, which includes a seven-degree offset handle and contoured body, helps minimize fatigue. The chainsaw also keeps vibrations to a minimum, thanks to Husqvarna's Low-Vib technology, which makes the chainsaw easier on your joints.
The 240E is backed by a two-year manufacturer's warranty.
Husqvarna: Exceptional Products for Exceptional Yards
Great yards demand equipment that is as dedicated and hardworking as you are. Fortunately, Husqvarna's range of garden equipment offers everything from lawnmowers and snow blowers to trimmers and chainsaws that let you master your slice of the great outdoors. With Husqvarna, it's easy to make your yard the envy of the neighborhood.
What's in the Box
Husqvarna 240 E-series Chainsaw.


The Husqvarna 240E Chainsaw was named "Best Buy" by Consumers Digest.

Want to read more honest consumer review about Husqvarna 240E 16 Inch 38.2cc 2-Stroke Gas-Powered Chain Saw now ?

Troy-Bilt TB70SS 17-Inch 31cc 2-Cycle Gas-Powered Straight-Shaft String Trimmer with Detachable Shaft Review

---

Average Reviews:

(More customer reviews)I started with the straight-shaft trimmer and soon added the pole saw for lopping off those low hanging limbs.Some pole saws have the motor in the saw and are practically impossible to use because they are so top heavy.The Troy-Bilt motor acts like a counter-balance to lighten the weight of the saw.Now, I've added the brush cutter which cuts tough weeds and grass, but doesn't do much for small tree seedlings more than a half inch in diameter.I've used it two full years for trimming grass, limbs, and weeds (sunflowers) and can usually depend on it starting with 1 or 2 easy pulls.I've had a couple of other string trimmers and hated them because they were hard to start, but the Troy-Bilt (MTD) is very satisfactory.I've recently switched to .105 line and it lasts a long time if you stay away from curbs and foundations.

Click Here to see more reviews about: Troy-Bilt TB70SS 17 Inch 31cc 2-Cycle Gas-Powered Straight-Shaft String Trimmer with Detachable Shaft

Product Description:
The Troy-Bilt 2-cycle 31 cc clutch gas trimmer features convenient EZ-Start choke technology, which allows the user to simply flip the choke, prime the engine, and then give a slow, smooth, easy pull for a guaranteed start. The EZ-Start technology allows the trimmer's engine to engage with 55-percent less effort than most gas models. With its rugged 31 cc engine, the trimmer provides plenty of brawn to power through the most ragged, overgrown growth. The trimmer's professional-style straight-shaft, split-boom design gives easy access underneath low-growing shrubs. The trimmer cuts in a 17-inch radius and features heavy-duty, 0.095-inch dual lines with convenient bump-head line release.
When it's time to replace the line, the featured SpeedSpool line replacement system is exceptionally easy to load and rewind, all without removing the spool or taking it apart. The entire trimmer feels exceptionally balanced and comfortable in the hand, and the ergonomic soft-grip D-shaped handle easily adjusts for both right and left-handed users. The trimmer's engine and upper handle is compatible with other Troy-Bilt EZ-Link attachments (sold separately), a feature that allows you to turn your trimmer into an edger, cultivator, hedge trimmer, blower, or pole saw. The trimmer comes with all the necessary oil for immediate operation, and is covered by a 2-year limited warranty.

Want to read more honest consumer review about Troy-Bilt TB70SS 17 Inch 31cc 2-Cycle Gas-Powered Straight-Shaft String Trimmer with Detachable Shaft now ?