
Average Reviews:

(More customer reviews)This is a great
jack. It comes with a steel base and a flat steel platform that
supports itself well, even in the off the road dirt or a gravel
drive way (it's not the one shown in the picture at the time of
this posting - the picture shows legs and not the flat base).It's
sturdy, lifts steady with more than enough height if you need it. I
am very pleased with its construction and performance. I highly
recommend it. It worked so well I bought a second one. Also, the
jack was delivered quickly. I am very satisfied with The
Sportsman's Guide (they respond quickly to e-mails - I wanted to
make sure I didn't get the one with the plastic base, legs, and
feet) and Buffalo Tools (all quality - no plastic base, legs, or
feet).
I had bought an electric jack from Jacks Tool Shed, gray with
skinny legs and brass looking feet. When Jacks jack was used on
dirt (like when you need to change a tire off to the side of the
road side in the dirt or get stuck on the side of the road) as the
body of the jack started to grip the dirt, the back legs broke off
(plastic legs) and the base of the jack split in half diagonally
through the back rivets (plastic base).They advertized it as all
steel construction.I had used the jack in the garage on a concrete
floor and it worked well.However when I used it out in the real
world in an emergency (13 months after I bought it) and the rear
legs broke off and the base split, and the car swung over. I
informed Jacks Tool Shed of the incident, and asked for a refund:
Jacks Tool Shed told me to take a hike and provided it to me in an
e-mail - not too bright.
However Amazon stepped right in and provided me with a full refund
and Jacks Tool Shed provided Amazon a full refund. I don't know if
my second e-mail to Jacks Tool Shed had anything to do with it, I
sent Jacks response plus a copy of their advertisement to my wife's
side of the family (3 Attorneys, an Assistant DA, plus a Judge just
for starters) - their response wasn't pretty.
Like the British say about the American Government; that after all
possibilities have been exhausted, the right decision is made.
Click Here to see more reviews
about:
Buffalo Tools? Electric Car Jack
Product Description:
Lift up to 2,000 lbs. at the touch of a button. Buffalo Tools
Electric Car Jack, SAVE BIG! Backsaver! 12-volt Electric Car Jack
safely lifts and lowers loads via remote control. No more fighting
with an old fashioned hand jack. Just touch a remote button for
control. Plugs in your 12V car lighter socket; 12 ft. power cord
easily reaches any tire; Push button controller with 12-ft. cord;
Heavy-duty 10-amp motor; Lifts 5-14"; 2,000-lb. capacity; Strong
steel construction; 5 x 16 1/2 x 7 3/4", weighs 11 lbs. We have
lift-off. Order Today! Buffalo Tools Electric Car Jack
Get
17% OFF
Want to read more honest consumer review about Buffalo Tools? Electric Car Jack now
?
Date Published: Jan 25, 2012 - 12:45 am

Average Reviews:

(More customer reviews)Overall this brush
is a good addition to have for washing the car.The only problem I
have is that the bristles are too long, making it nearly impossible
to squeeze between the tire and fender for cleaning on my sedan.It
would probably work a lot better for a truck or anything with
deeper fenders or larger wheel height.
Click Here to see more reviews
about:
Viking Long Handle Wheel and Fender Brush with
Deluxe Grip
Product Description:
The Viking Long Handled Wheel & Fender Brush is the optimal
tool for cleaning tires, wheels, and wheel wells. It's soft, triple
flagged bristles will not scratch and it's soft rubber bumper
protects the paint from an accidental bump. With a 16 inch handle,
there is plenty of length for hard to reach areas. A no-slip rubber
grip keeps one in control and a convenient peg-hole design allows
one to hang this brush to dry it out before its next use.
Want to read more honest consumer review about Viking Long Handle Wheel and Fender Brush with
Deluxe Grip now ?
Date Published: Jan 24, 2012 - 7:29 am

Average Reviews:

(More customer reviews)I bought a lifan
200cc and wen i received it it was damage they also say that the
motorcycle is street legal but the emission label says is off high
way meaning you can't use it in the streets and wen i contact this
people they were not responding so don't buy from this people.
Click Here to see more reviews
about:
LIFAN 200cc Sport Bike /On Road Motorcycle
Product Description:
GRX200 sport bike is all that, sleek, fast and just simply cool. It
is 40" high, and wheel base 81". Most importantly, this bike is
powered by 200cc air cooled LIFAN engine, the top rated engine in
China. The bike goes up to 85 mph, with 70-80 mpg depends on
rider's weight. It is built with enforced Steel Frame, with carring
capicity of 400 lbs. The bike comes with chain driven system,
equiped with front twin telescopic suspension, and rear mono shock.
The safety features includes front hydraulic ABS disc brake and
rear drum brake, front and rear 18 x 4 inches all terrain sports
tire. With 41 degree turning Radius, 5 speed manual transmission,
this bike offer truely comfort and fun riding it. It also has
electric start in addition to kick start for emergency use.
Dimensions: Length: 79.3" * Width: 29.3" * Height: 44.5" *Seat
Height: 32" *Foot Peg to Seat Height: 19" *Handle Bar Height: 40"
*Ground Clearance: 8" *Wheelbase: 81"
Want to read more honest consumer review about LIFAN 200cc Sport Bike /On Road
Motorcycle now ?
Date Published: Jan 24, 2012 - 4:19 am

Average Reviews:

(More customer reviews)I have this sub
mounted in a custom wood enclosure of .48 cu ft and it sounds
incredible!I didn't think it would hit very hard or sound extremely
good because of the shallow depth design and the fact that I'm only
pushing 200W rms to it but it has proven me wrong.Pioneer
recommends .60 cu ft, but the sub can be installed in a box with
volumes between .35 to .70 cu ft with only a 3.5" mounting depth.It
comes with a ring cutout as well as measurements for a sealed,
ported and bandpass box.The price at Amazon is almost half of what
you will find anywhere else.
Click Here to see more reviews
about:
Pioneer TS-SW2541D 10 4-ohm Shallow
Subwoofer
Product Description:
Our newest line of subwoofers are designed to provide wider
installation options for a broad range of vehicles. These
""Shallow-Mount"" Subwoofers feature multiple patent-pending
features to deliver the big bass performance of a full-size
subwoofer, but in a compact design that can be installed either
behind or under seats depending on the type of vehicle. The
mounting depth is just 2-7/8"" - less than half a typical subwoofer
in this class.
This 10"" shallow subwoofer handles 1000 watts max., 350 watts
nominal power, and delivers deep bass with top-notch sound quality
thanks to features like Pioneer's extremely strong and lightweight
IMPP Composite Double Cone Woofer, the patent-pending M-shaped
Surround, and more.
One of the new patent-pending features is called the ""Air
Suspension Control System"". This design locks in air between the
main cone and drive cone, ensuring smoother and more precise
movement of the cones, for superior linearity. The locked-in air
behaves like a spring, so there's no need for a traditional spider
structure. The drive cone also deflects air pressure inside the
enclosure, which further contributes to the remarkable bass of the
small package.
The TS-SW2541D subwoofer is extremely flexible for installation,
able to fit almost anywhere. There are two available Subwoofer
Enclosures - the UD-SW10B is designed to fit behind the seat of a
truck, or in the back of an SUV or Minivan; and the UD-SW10U is
design to fit under the rear seat of many pickup trucks.
Want to read more honest consumer review about Pioneer TS-SW2541D 10 4-ohm Shallow
Subwoofer now ?
Date Published: Jan 23, 2012 - 7:29 am

Average Reviews:

(More customer reviews)Buyers should
consider the purchase of this product for the enclosure and an
included free sub. The enclosure is great! Very hard, very heavy,
high quality. You can actually get some good thumps with it being a
shallow case! The subwoofer is OK. You aren't gonna shake the cars
next to you with this thing, but hopefully people realize this
considering the size (10"). It is very good for your standard
volumes. I still have it in and am very happy with it. You can
always replace the subwoofer later with a higher quality if you
want (it IS user replaceable).
It says it requires you to cut a hole in the back panel that is on
top of it, but I did not as I want to leave the car in as "stock"
fashion as possible. This causes some vibrations from the back
panel, but I put a small line of foam in between and it is fine
now. Cannot even tell the sub is there without the car on. I put it
in a 2006 Scion xB and it fits, but I cut a line of foam from the
"Spare Tire" side to make it fit better. Only about half an inch
which is just extras anyways.
Click Here to see more reviews
about:
Scosche Scxb04 Loaded Subwoofer Enclosure For
2004-2005 Scion Xb
Product Description:
Do you have a 2004-2005 Scion XB? If so, EFX has you covered for
bass. This custom built subwoofer enclosure is loaded with a 10"
EFX subwoofer. The box fits under rear storage panel.
Get
25% OFF
Want to read more honest consumer review about Scosche Scxb04 Loaded Subwoofer Enclosure For
2004-2005 Scion Xb now ?
Date Published: Jan 23, 2012 - 1:50 am

Average Reviews:

(More customer reviews)Worried about that
tow vehicle and boat trailer left at the ramp while you stake out
the big ones? Concerned that your boat, motor and trailer left at
your lake house will sprout wings and fly away?
This immoblizer or "boot" as they are known in PD circles is an
almost fool proof anti-theft device. Placed on the rim of a trailer
tire yields the trailer immobile. On a motorcycle, on a motor
vehicle, whatever. I called my insurance man to insure my 35K
pontoon boat, motor and trailer and he advised an immobling device
(did not specify this one) which would qualify me for a 15%
discount on my marine insurance. Wish they had one for a teenager
that was legal, non fattening and non punitive.Unless you live in a
town next door to the Chief of Police, you may want to consider
this restraining device, easy to place, easy to remove (with a key)
and practically indestructable. This past weekend (Labor Day 2005)
I used mine for the first time and it works every time unless you
forget to put it on.......
Click Here to see more reviews
about:
Alpha Lock - Wheel Immobilizer, Standard Model
(AL700C)
Product Description:
Protect your vehicle and equipment with the same security device
currently used by police departments around the world. The Alpha
Lock is the only product ever endorsed by "The Crime Prevention
Program" and recommended by several insurance companies.The
standard model fits all cars, trailers, light trucks, portable
construction equipment, etc. It adjusts to fit any tire up to 11.5
inches wide in seconds. Completely immobilizes the vehicle wheel
from rotating or turning. Lock is pick and drill resistant; cannot
be frozen with freon. Hardened steel construction, rated 6 times
stronger than commercial steel. Soft, coated arms will not mar or
scratch wheels or rims. Weather resistant. Highly visible bright
color. Compact, easy to use and store. Has over 800,000 key
combinations. 2-year replacement warranty against manufacturers
defects.
Get
37% OFF
Want to read more honest consumer review about Alpha Lock - Wheel Immobilizer, Standard Model
(AL700C) now ?
Date Published: Jan 22, 2012 - 7:10 am

Average Reviews:

(More customer reviews)This stuff
definitely works.It will not magically remove brake dust
however.You still need to scrub with a brush, and have to be
extremely careful not to get this acid on any unprotected part of
your body, or painted car surfaces.Pretty serious acid burns appear
shortly after exposure.Do not under any circumstances use this on
clear-coated finishes; if not removed promptly, this may eat
through the finish and ruin it.
Personally, I resolved the brake dust issue by replacing my brake
pads with ceramics.The dust is of very light color, and frequency
of wheel cleaning is reduced drastically that way.It also cleans
off way quicker just with soap, water and wheel brush.Overall, I
don't even use Blue Coral or any other spray-on cleaner anymore -
just grab your brush and a bucket of soap water and scrub (you
won't get away from scrubbing anyway).
Oh, one great application for this - stove top and kitchen counter
cleaner.Just use thick kitchen gloves and enjoy squeaky clean
degreasing action.
Click Here to see more reviews
about:
Blue Coral WM832 Wheel Magic Cleaner 32 Oz
Product Description:
Blue Coral Wheel Magic is a easy to use wheel cleaner that looses
brake dust.
Get
8% OFF
Want to read more honest consumer review about Blue Coral WM832 Wheel Magic Cleaner 32
Oz now ?
Date Published: Jan 22, 2012 - 4:45 am

Average Reviews:

(More customer reviews)I needed a front
wheel stand for winter storage and maintenance and this one looked
like a good value for the price with double-wheels and rubber
fingers for lifting the fork.
The good news is it's well built, easy to lift, adjustable and the
rubber fingers grab the fork on my 2008 CBR600RR perfectly.
The bad news is that it doesn't actually lift the wheel off the
ground. Yup, I thought I was crazy, but the "throw" on the arm is
so little that it momentarily comes just off the ground but then
swings back down as the handle touches the floor. It is lifted
enough to relieve some of the pressure off the tire, but not enough
for the wheel to spin.
Since I use it for winter storage and wanted the stand off the
ground anyway (to avoid any pooling water in my garage during the
winter from snow melt) my work-around was to place both sets of
stand wheels under two lengths of 2x4, which lifts the front wheel
almost 2 inches.
I don't know if my (stock) bike is an exception but I wouldn't
think so; if the limitation described above is okay with you then
its a good value for a well built stand, otherwise keep
looking.
Click Here to see more reviews
about:
Black Widow Universal Motorcycle Front Wheel
Stand
Product Description:
Professional quality front wheel motorcycle stand lifts motorcycles
off the ground by the front forks for maintenance and servicing.
The front wheel stand is adjustable to work with front forks 8" to
13"wide, measured from the outside of the fork tubes. The
2.5"rubber coated pivoting arms nestle under each fork and allow a
single person to let a motorcycle front-end from the frame
handle.
Want to read more honest consumer review about Black Widow Universal Motorcycle Front Wheel
Stand now ?
Date Published: Jan 21, 2012 - 9:05 am

Average Reviews:

(More customer reviews)Cover doesn't keep
Rhino dry. After rains the interior had puddles. Seller claimed it
was condesation. There was too much water to be condensation. He
did offer refund if I wasn't happy. The cover does fit well and
keeps most of the weather out. Product is better than no cover at
all."
Click Here to see more reviews
about:
UTV/ Off-Road Golf Cart Cover Grey
Product Description:
-Color: Light Grey
-Sturdy polyester w/ PE coating underneath to keep your UTV clean,
and safe.
-Double top-stitched w/ heavy-duty nylon thread
-Elastic hem with 8 reinforced grommets for a clean, secure fit
-One year warranty
This cover will fit most popular UTV's w/ roll cages (i.e. Yamaha
Rhino, Polaris Ranger XP, TM, 4X4, Kawasaki Mule 600/610, 3000/3010
and standard length John Deere Gator models and most any other
model up to 118" L.O.A.)
This cover will also fit above models with roof lights, front
winches and oversized tires. .
Dimension: 120"L x 62" W x 75" H
Get
24% OFF
Want to read more honest consumer review about UTV/ Off-Road Golf Cart Cover Grey
now ?
Date Published: Jan 21, 2012 - 12:42 am

Average Reviews:

(More customer reviews)The lights arrived
more quickly than expected and in perfect condition, set up was a
breeze and they look great on our bike! Will definitely do business
with this seller again!
Click Here to see more reviews
about:
28-LED Motorcycle Accent Light Kit - Engine and Rear
Wheel-Color:ORANGE
Product Description:
All LEDs are pre-wired to a Heat Resistant-Tube Covered Wiring
Harness with Cradle Mounts already attached... Just remove your
tank,?place the 12 LED Harness on your frame over the cylinder
heads with the pre-wired Cradle Mounts and place the?8 LED Harness
of the Rear Wheel Accent Kit at your Rear Wheel (or anyplace else
for that matter)?on the right and left side?pointing into your rear
wheel?with the pre-wired Cradle Mounts, And MOST Important? place
one POD inside your breather between the two cylinder heads
pointing horizontally to the other side then place the other POD on
the other side pointing horizontally to the first POD then? connect
the Engine Harness, Rear wheel Harness and the two PODs together
and?connect to your battery... Hit the On/Off Switch and you have
the most beautiful LED Accent Lighting you have ever seen... I
invented this new system because I got tired of wasting my time
crimping and splicing wires... This new system has reduced the time
of installation by over 50%. And now it is so simple that anyone
can do it... Just place each LED light over your engine where you
want them & connect to your battery & you got lights!!!It's
that easy!!! This Kit Is Designed To Work On Most Any Bike Made
with Two (2) Cylinders Heads...This kit is Not Recommended for
"Crotch Rockets"...
Want to read more honest consumer review about 28-LED Motorcycle Accent Light Kit - Engine and
Rear Wheel-Color:ORANGE now ?
Date Published: Jan 20, 2012 - 9:05 am

Average Reviews:

(More customer reviews)I bought this for
use with my enclosed trailer and my Yamaha 250 dirt bike.When
shopping for wheel chocks I found this listed from one manufacturer
but multiple sources (eBay, Amazon etc).
The one thing that wasn't obvious is the fact that this chock is
designed with a pivot mechanism that actually locks the tire.You
roll the bike in, wrap the bar over the top of the tire, and then
push back down on a lever.In the picture it shows all parts draped
over the top of the tire, but the person taking the picture didn't
set it up properly.
The positive clamping action really works well, though you have to
play with it a bit to get the right amount of tension.I now use no
straps on the front of the bike at all, rather this chock on the
front and a strap on each side at the back.The bike holds rock
steady with this arrangement.
Click Here to see more reviews
about:
Bike Shoe Motorcycle Wheel Chock Cr/kx/yz/rm
125/250
Product Description:
FOR USE WITH OFFROAD AND DUEL SPORT BIKES. AN ADVANCED METHOD TO
SECURE YOUR MOTORCYCLE IN YOUR TRUCK,TRAILER,VAN ETC. CLAMPS TO ANY
19-23" WHEEL WHILE APPLYING NO PRESSURE TO YOUR FORK SPRINGS,AND
WILL HOLD YOUR MACHINE EVEN WITH A FLAT TIRE!! YOUR BIKE NEVER
MOVES ,WHILE YOUR SUSPENSION ABSORBS ALL MOVEMENT. LOADING AND
UNLOADING IS DONE SAFELY AND SECURE IN SECONDS. INCLUDES ALL BOLT
DOWN ACCESSORIES
Want to read more honest consumer review about Bike Shoe Motorcycle Wheel Chock Cr/kx/yz/rm
125/250 now ?
Date Published: Jan 20, 2012 - 12:42 am

Average Reviews:

(More customer reviews)I ordered this kit
to haul two Harleys to the Daytona Beach rally.The chocks are
strong and the tie downs were used, in two spots, to secure both
bikes.We hauled the bike a total of 1600 in an open trailer and
everything was secure.These items are definitely worth the
money.
Click Here to see more reviews
about:
Motorcycle Wheel Chock and Tie Down Kit.
Trailer,Nest
Product Description:
You are buying a brand new motorcycle wheel chock & tie kit
from "Pit Posse". Designed to hold the front wheel of your
motorcycle Mount to the bed of any trailer, truck or van. Made from
full 1" tubing for extra strengthFinshed in black gloss powder
coating Universal fit for all motorcycles up to tire width of 5
?"Pre-drilled mounting holes Kit also includes 2 surface mount tie
down rings with 1,200lbs MBROur commitment to bringing the finest
quality products at the most affordable price is unsurpassed
Want to read more honest consumer review about Motorcycle Wheel Chock and Tie Down Kit.
Trailer,Nest now ?
Date Published: Jan 19, 2012 - 11:30 am

Average Reviews:

(More customer reviews)This product is
basically a strong piece of tarp with tough plastic edges that you
snap together to hold the tarp in place.
I probably didn't do enough research on this item before purchasing
so I was disappointed. I have had this for about a month now, still
no tears in the plastic.When this one does finally give out I won't
purchase a new one, I'll try to save some money next time and
purchase a plastic cover / mat / or even cheap carpet from a
hardware store.
Click Here to see more reviews
about:
Park Smart Motorcycle Garage Mat: Silver 4.5' X
9'
Product Description:
Place a Park Smart Mat under your motorcycle, golf cart, snow
mobile, or lawn mower. This mat measures 4?' x 9' and catches every
drop of mud, slush and grime that falls off of your bike, allowing
your garage floor to remain clean and dry. You'll never track mud
and grime into your home again. Prevents slips and falls that would
normally be carried from the wheels, wheel wells, and
undercarriage. Made of thick, rugged 20-mil vinyl with a 1 raised
Snap-On Edge. Park Smart is the garage-floor protector that you
drive onto, so it surrounds the whole vehicle. Easy to clean! After
removing one or more of the lip end pieces closest to the garage
door, sweep or hose off the Clean Park Mat. For mats with heavy
debris accumulations use either a Wet/Dry Shop Vac, or simply
squeegee out the garage door. Oils and grease wipe right off Park
Smarts waterproof, non-flammable, oil-impervious vinyl surface. So
your concrete floor remains clean and free of grit, salt damage and
oil stains. Note: Assembly required - No tools needed. 1" side
snap-on edging needs to be attached after mat is in place.
Get
11% OFF
Want to read more honest consumer review about Park Smart Motorcycle Garage Mat: Silver 4.5' X
9' now ?
Date Published: Jan 18, 2012 - 11:40 am

Average Reviews:

(More customer reviews) This stand is
worth every penny. The only reason I gave it 4 stars and not 5 is
there are better stands out there. BUT, they are a whole lot more
exspensive. Unless you own a shop and work on bikes for a living
this stand will do just fine. I have told all my riding buddies
about them and a few of them have bought them and are just as happy
as I am. Two thumbs up!!!
Click Here to see more reviews
about:
Motorcycle Swingarm Stand - Red
Product Description:
The MC-STAND is a perfect solution for lifting the rear of a
motorcycle for drive chain, sprocket and rear wheel servicing.Heavy
duty, 1-1/2" tubing pivots on four, 3" wheels to lift the
motorcycle being serviced by the rear swingarms.Adjustable to
swingarms 8-3/4' to 11-1/2" wide and spools 10-1/2" to 12.5" wide.
Swingarms are protected by integrated rubber mounts which can be
interchanged to work with spools by the turn of a knob. Weighs 10
lbs. Color: Red
Want to read more honest consumer review about Motorcycle Swingarm Stand - Red now ?
Date Published: Jan 18, 2012 - 3:15 am