Feed: nueROM - nueDynamicClock - AggScore: 45.3

http://www.nuerom.com/BlogEngine/post/2009/04/20/nueDynamicClock.aspx#id_9a86cac5-1580-4f98-af29-0213a5c85198 mementomori on nueDynamicClock

---

tnx man will give it a try. If its really good i will donate some!!

Aaron on nueDynamicClock

---

Installed this on my CDMA TP running wm6.5 with not complications. It successfully reduces my idle discharge current from 61mA to 17mA. Will post with additional comments after some time.

GhettoBSD on nueDynamicClock

---

after installing and rebooting i get the following Critical Error: An unhandled exception has occurred. The application will terminate. Any ideas? Running cdma tp on sprint with Silence Rom 9 (w6.1)

David on nueDynamicClock

---

Works fine on Touch HD (HSDPA)

Proto732 on nueDynamicClock

---

What is the normal state for the processor? Do our devices have any built in processor/power scaling and your app is modifying the defaults? or is there no scaling at all built in?

no2chem on nueDynamicClock

---

There is scaling, but it is disabled on all CDMA phones. I believe it is enabled on the GSM Diamond. There is a signifcant performance impact with scaling enabled, according to posts about how it works on the TMobile G1 (Dream/Trout). I read something like 20-30% hit even at full load. Keep in mind the g1 runs at ~384 MHz as default. The normal state of the processor on all current generation Diamond/Touch Pros is 528MHz.

pdaphonehome.com on nueDynamicClock

---

Pingback from pdaphonehome.com Improve Battery -- Tweaks - PDAPhoneHome.com

bubbatex on nueDynamicClock

---

OK, how do you get rid of it? Seems a little unstable for me on the stock Sprint ROM. Once I came out of sleep (pressed the power button) and the screen was mirrored (reversed, like I was behind it. Then I had a conflict with Phoneweaver after a restart (not sure if this was the cause, but I track my problems with each program I install). So, remove program does not remove it and even reloading a previous backup did not.

no2chem on nueDynamicClock

---

if you're having problems uninstalling it, use dotfred task manager and stop the service NDC0: before uninstalling. I thought I had fixed the problem .. maybe I forgot to put in the setup DLL. I'll double check.

tony on nueDynamicClock

---

it's telling me to install enablerapi.cab. where do i find this file?

rcracing.jdm.pl on nueDynamicClock

---

Pingback from rcracing.jdm.pl Automatyczna zmiana taktowania procesoró Qualcomm

James on nueDynamicClock

---

Installed and when setting it to the lowest i can't get my phone to come out of sleep, if i set it to the next lowest i have 1) seen my screen inverted when i turned it back on and 2) seen it go all white. mighty 2.16 over here

kobi on nueDynamicClock

---

Don't use on the Treo Pro. Causes lock ups even though the processor is compatible.

TMartin on nueDynamicClock

---

I installed it on my Sprint Touch Pro. When I had it on the lowest setting it wouldn't come out of sleep once and I also notice my screen was inverted backwards once as well. It looked soo cool. Battery life is slightly better too.

kobi on nueDynamicClock

---

Even on the second fastest speed (only one notch down from full speed), this causes massive problems with the phone app on the Treo Pro.