Feed: Industrial Systems & Solutions - AggScore: 87.9

Hydraulic Presses and Production Lines

---

Hydraulic presses and production lines, automation, tooling for the sheet metal and tube forming industry, robots and feeders for sheet metal parts up to 200 kg, production lines with conveyor widths up to 1600 mm. Hydraulic presses for punching, deep drawing, and embossing, hydro-forming with a force of 100 to 20000 tons, bed presses up to 5000 x 3000 mm.

Equipment for making Heat Exchanger Plates

---

Forming tools for handling sheet metal and tubes with latest hydro-forming technology. Complete production lines for various industries such as production of vehicles, home appliances, ventilation, roof drainage systems, fire extinguisher shells and filters housings, beer kegs, and heat exchanger plates.

Press Lines for making Fire Extinguisher Shells

---

Press lines for producing fire extinguisher shells in sizes from 1 to 12 kg and blank thickness from approx 1,4 to 2,5 mm.

Universal Press ODEN-WP

---

Four column versatile hydraulic press designed in a one piece Welded Plate steel frame «WP» based on FEA stress analysis. Suitable for drawing operations, punching, embossing and hydroforming with pressure dome. The slide is equipped with an 8-point gib guiding system. The cushion and third cylinder can be selected as options and are available in sizes that correspond to the available press forces. Press force range up to 3 150 kN and press bed size up to 1 600 x 1 300 mm as standard.

Multi Purpose Press ODEN-F

---

Multi Purpose Press ODEN-F available in many different configurations allowing for a wide range of manual or automatic production solutions. It is a four column press designed in a one piece welded steel frame based on FEA stress analysis and suitable for most of the today's tooling operations. Press ODEN-F has great possibilities when it comes to tool change, automation and stroke/gap alternatives which makes it very competitive on the market. Press force range up to 12 500 kN and press bed size up to 3 000 x 2 200 mm as standard.

Large Bed Press FT

---

Large Bed Press FT for large wide parts, designed to process many types of work including drawing, coining, stamping and forming operations. The frame modules are assembled with hydraulically pre-stressed tie rods which leads to a very rigid press frame with minimal deflection. Press force 6 300 - 25 000 kN.

Deep-draw Press MIMER

---

Hydraulic Deep-draw Press MIMER specially designed to perform advanced deep drawing operations and hydromechanical forming. Can produce deep drawn parts in one single cycle. Press force 1 250 - 6 300 kN.