Feed: Price Pfister Kitchen Faucets - AggScore: 14.1

Under-Sink Water Filter - Cbf3 Undersink Water Filter Review

---

Average Reviews:

(More customer reviews)There isn't a whole to talk about considering this is just a filter. Installation is very easy and contains everything you need. It even comes with a saddle valve for tapping into the water supply, although I wouldn't recommending using that since they just become problematic over time. I used a regular ball valve taped into the water supply (although this is more work). The other nice thing is this one comes with an air purge on top to get the all of the air out of the top. The one improvement would have been to put in a small drop line off this purge valve because when you get all the air out you will know because water sprays all over the place if your not paying attention. Still it's better than not having one. It comes with the a tool to screw on the filter base and you need to make sure it's tight. I was surprised how tight I needed to get it to prevent it from leaking at that point, but not a big deal.
The only real major negative is the water tap that comes with this is just an ugly white plastic piece of crap. I had a purchased a separate water tap to go with my kitchen faucet. I wish they would sell this with out the water tap because mine went right in the trash.

Click Here to see more reviews about: Under-Sink Water Filter - Cbf3 Undersink Water Filter

UNDER-SINK WATER FILTER - NSF Certified Standard 42 & 53 ~ Reduces leadcryptosporidium & giardia cysts ~ Improves tastereduces odor & chlorine ~ Reduces rust & sediment ~ Separate faucet for drinking & cooking water ~ Includes cartridge & installation hardware

Buy cheap Under-Sink Water Filter - Cbf3 Undersink Water Filter now.

Blanco 440058 - Meridian Soap Dispenser Stainless (Satin Nickel) Review

---

Average Reviews:

(More customer reviews)Purchased to go with the new Meridian faucet. Easy to install, matches nicely. Kind of flimsy plastic holder for soap, wish it was a harder plastic.

Click Here to see more reviews about: Blanco 440058 - Meridian Soap Dispenser Stainless (Satin Nickel)

Meridian Soap Dispenser - 911-341-340

Buy cheap Blanco 440058 - Meridian Soap Dispenser Stainless (Satin Nickel) now.

InSinkErator H-990 1/2-Gallon Instant Hot Water Dispenser Review

---

Average Reviews:

(More customer reviews)I have installed Sears units and other In-Sink-Erator units and I will not install this model again. It has a very poor connection between the hot water unit and the dispenser. The nylon nut that secures the 1/4 copper tube to the hot water unit does not work. Or should I say it does not work when you are lying on your back under a sink with limited mobility! I called 1-800-558-5700 and asked them what to do and they said to keep tightening it until it stops leaking. The directions however say tighten it finger tight and then turn it with a wrench no more than 3 turns or it may crack the unit. And by the looks of the water jacket it will crack.
This is a new design the older models sealed this connection. I guess in the efforts to save 12 cents on a brass fitting quality has gone out the window.

Click Here to see more reviews about: InSinkErator H-990 1/2-Gallon Instant Hot Water Dispenser

Designed with an easy-grip handle to effortlessly dispense water.White color3/4 gallon capacity delivers 60 cups/hour of near-boiling water120 VAC, 750 watts, 6.5 ampsThermostatic control adjustable from 140 degrees Fahrenheit to 200 degrees Fahrenheit1-Year IN-HOME parts and labor service warranty (residential ONLY)UL and NSF listedPatented DuraTank hot water tank system (Uniquely designed for unsurpassed performance)

Buy cheap InSinkErator H-990 1/2-Gallon Instant Hot Water Dispenser now.

EdgeStar Black Refrigerator for Kegerator Conversion - Refrigerator Only Review

---

Average Reviews:

(More customer reviews)I bought this as my first Kegerator, it came fairly quickly "about a week earlier than they had estimated". Setup was fairly simple, but had a few kinks. I had to reseat the tower hosing on the plastic ring it was mounted on as it was crooked, and the tap handle was missing. I was'nt very angry with the missing handle what I did was going to a local store and bought a "Shift Knob" that was really nice for my handle. The system came with the empty tank and the gauges I needed, I had to search alittle for a place that would fill that tank. When I did find a place to fill it it only cost about 15 bucks. so 25 bucks later I had a functioning kegerator. Overall I am very happy, who would'nt when they can have a nice cold draft at home?

Click Here to see more reviews about: EdgeStar Black Refrigerator for Kegerator Conversion - Refrigerator Only

The EdgeStar KC2000 Draft Beer Dispenser offers you all the advantages of enjoying your favorite draft beer at the pub, in the comforts of your home. Holding just about any size keg shell, including the most common kege shells popular half and quarter shells, this economical and well crafted model comes with American made components including an American Sankey keg coupler to fit most of your favorite domestic beer kegs. Additional features include: caster wheels for easy portability, a movable drip tray and chrome railing. The sleek black cabinet with chrome tower will impress any beer aficionado. Our easy installation guide, which includes step by step installation with photos, will make setup a snap. You will be enjoying draft beer in no time. Other features include two removable wire coated shelves allowing easy conversion into an auto defrost refrigerator. Plus a metal floor plate to protect your refrigerator while it's being used as a beer dispenser. This unit also comes complete with a 5 lb. CO2 cylinder equipped with an easy to read pressure gauge that hides discretely on the back.

Get 35% OFF

Buy cheap EdgeStar Black Refrigerator for Kegerator Conversion - Refrigerator Only now.

Portable Reverse Osmosis Water System Four Stage 100 GPD Removes Fluoride Review

---

Average Reviews:

(More customer reviews)I got this RO unit for my apartment because I don't have counter space for another appliance and undersink installation is an expensive hassle. I thought it fit the bill perfectly.
First thing that happened was that it shipped without the faucet adapter that was supposed to be included. When I requested that, it did fit on my faucet, but then I discovered my water pressure wasn't enough for the gauge to even get up to the "operating" range. OCCASIONALLY at random points during the day or night it might just pass the "operating" line but it is unpredictable.
I tried to use it anyway since I spent the money and I figured some filtering is better than none, but it takes about half an hour to fill a liter bottle. In addition, the diverter valve doesn't work, at least on mine. If I leave the valve on my faucet, it runs a trickle through the RO unit too. Considering that the instructions warn not to run hot water through the unit or it will completely ruin the membrane, I couldn't leave the diverter valve on my faucet since I use hot water for dish washing, etc.. That means every time I want to use the unit, I have to remove the faucet aerator with a wrench, attached the RO diverter valve with a wrench (has to be tight or it will leak unfiltered water into your container despite the rubber seal), wait half an hour for a drink, remove the diverter valve and replace the faucet aerator for normal dish washing, etc..
All in all it is so much of a hassle I just don't use it and it is currently wasting space in a cabinet. If you truly don't have the space for any type of normal RO unit (e.g. in an RV) then this might be your only option. If you want filtered water that you don't have to fight for, then I would recommend a better designed unit.

Click Here to see more reviews about: Portable Reverse Osmosis Water System Four Stage 100 GPD Removes Fluoride

Four stage portable reverse osmosis system 100 gpd, is perfect for apartments, RV's, travel and hotels. The 100 gallon per day membrane makes about 1.5 gallon of water in as little as 20 minutes. Simply connect it to your faucet with the diverter valve adapter, turn on your tap water, and collect the pure water into a storage bottle (or any container). After usage just disconnect and store, it's compact size unit takes up very little space, (15" long, 7" high, 7" wide).STAGE 1 - 5 micron sediment filter spun prefiltration for mechanical reduction of rust and particulate, and provides protection for carbon prefilter.STAGE 2 - activated carbon prefiltration for reduction of tastes, odors, chlorine, & organic impurities.STAGE 3 - thin film composite reverse osmosis membrane for reduction of dissolved solids, including the range of toxic heavy metals, plus Giardia & Cryptosporidium cysts.STAGE 4 - activated in line NSF acid wash carbon postfiltration for final polishing of off-tastes & odors.All components are NSF certified.Compact size: 15" long, 7" high, 7" wide.Maintenance: Sediment filter, pre and post filters recommended change every six months for regular usage, or once a year in light usage. 3 year warranty on hardware.Note: Reverse osmosis typically wastes 3 to 4 gallons of water for every gallon it produces.Notice: consumer is responsible for following any state and/or local regulations and plumbing codes pertinent to the purchase, installation and operation of our products.

Get 29% OFF

Buy cheap Portable Reverse Osmosis Water System Four Stage 100 GPD Removes Fluoride now.

Danby Portable Top-Load Washer Review

---

Average Reviews:

(More customer reviews)I bought this washer 2 years ago and it is still working great. I had no problems installing it at all despite of the fact that I am a woman:-) It is big enough for 2 people and I had even washed blankets in it. It is easy to wheel it all over the place as long as you don't have carpets in the bathroom or the kitchen:-) I thought that it will be noisy but is actually quiet and it is easy to connect to the sink. The only problem I had (which is more of a problem with my sink faucet than with the machine) is that sometimes it leaks from the faucet but once I replaced the rubber circle inside of the connector it was great. Before the replacement I just stopped the water flow once the machine was full and washing. And I have a portable dishwasher which connects to the same sink using the same adapter so there is no need to change it if you have more than one appliance.

Click Here to see more reviews about: Danby Portable Top-Load Washer

Designed for maximum energy and space efficiency, this Danby washer is ideal for small apartments and small budgets. Quiet operation adds even more to its advantage in space-limited residences. Temperature, water level and fabric selection options allow you to choose the best setting to protect your clothes from wear and damage while providing a perfect wash every time. Tough on stains yet gentle on clothes and generally unobtrusive, this is a first-rate washer all around.

Buy cheap Danby Portable Top-Load Washer now.

Plumbest B02-406 Decorative Basket Strainer, Oil Rubbed Bronze Review

---

Average Reviews:

(More customer reviews)This was installed in our new home. After one week of use, the "Oil Rubbed Bronze" finish started peeling off revealing a shiny chrome drainer. The Oil Rubbed Finish was actually a vinyl coating over the Chrome finish. What a rip off! Now I have to find a strainer with a real Oil Rubbed Bronze finish and go through the expense of having it re-installed. This goes for the disposal strainer as well.

Click Here to see more reviews about: Plumbest B02-406 Decorative Basket Strainer, Oil Rubbed Bronze

Buy cheap Plumbest B02-406 Decorative Basket Strainer, Oil Rubbed Bronze now.

Haier HLP21N 6.6-Pound Pulsator Wash with Stainless Steel Tub Review

---

Average Reviews:

(More customer reviews)I estimate that I have used this washer for 4 loads each week since buying from J&R in early October, 2006. I live in a studio in New York and bought this one because (1) it has a sink adapter, which the front-loading 14.3-lb model didn't seem to include and (2) at 17.5 inches wide/deep, it fit through my bathroom door, which the front-loading 14.3-lb model (at 20.5 inches wide) wouldn't.
Out of the box, you have to install an included metal pan at the bottom. Install it so that it is convex: there's a reason that the legs are so high. One of the problems I had during installation was that one of the screws holding this metal pan to the body comes very close to a clamp holding the gooseneck drain tube as it exits the body. The clamp had fallen out of position, and the end of the screw is close to where the clamp goes. I don't think I was ever in danger of puncturing the drainage tube, but it's something to watch out for.
You need a place to hang the drainage tube, between 31.5 and 40 inches high. The machine cannot fill the tub with water to a height above the maximum height of the drainage path.
On my first two loads, I made a puddle of water on the ground. There were two reasons for this: the first time, the water supply hose was not tightened sufficiently at the machine end, and water dribbled out and behind the machine until I figured out what was going on. With that tightened (I used a wrench), there was no leak. On my second load, I put in too many clothes (more about that later) and there was a water-resistant nylon jacket on top. Just before the very first spin cycle, some water was cupped on that jacket and did not drain out with the wash water. When the tub started to spin, that water came out. I never loaded that many clothes into the washer again, and haven't had any spills since.
During a normal wash cycle, the machine does the following steps three times: fill, agitate, agitate, drain, spin, drain, spin, drain, spin. The second and third iterations are called the "rinse" cycle. Often, the water out of the drain is still bubbly after the second spin. (I use a quarter capful or less of All no-fragrance 3x liquid concentrate.) So, I run another rinse cycle. If the machine detects an unbalance condition during a spin, it will stop, fill the tub with water, and agitate in an attempt to redistribute the clothes before draining and spinning again. I think the machine does this two or three times before giving up and beeping ten times to alert the user of the unbalance condition.
During the agitation process, this machine tends to intertwine long or extended parts of clothing --- shirt sleeves and socks --- into braid-like knots, which often trigger the unbalance condition during the subsequent spin. For example, when I wash four or five long-sleeved shirts together, I always have to untie and separate two or three of the shirts where the sleeves have been twisted together. I think good washing is where the wash water can touch every surface of the clothes, and being tied together prevents this. These problems probably would not happen with a front-loading washing machine.
What is the capacity of this washer? Well, I would say:
2 bath towels; or
2 pairs of jeans or pants; or
2 sweatshirts and 1 pair of sweat pants; or
4 long-sleeved oxford shirts; or
6 small-size undershirts; or
8-12 medium-size boxer underwear.
That's at the "high" water level. You may be able to load more than that, but I think the clothes won't get as clean, and the machine will probably reach more unbalance situations.
I once tried to wash a terrycloth robe. The robe fit in the tub, but the machine always got to an unbalance condition when it tried to spin. I think it's sort of like trying to run a centrifuge with only one tube. Sometimes after the spin cycle I find a sock or a shirt stretched across the middle of the tub, instead of having been thrown centrifugally against the tub walls.
Using my DSC-P71 digital camera in the multi-burst 30 frames-per-second mode and a light and a dark shirt in the washer, I estimate the initial spin at 450 rpm (light shirt passed once every 4 frames) and a final spin at 780 rpm (light shirt passed about 6.5 times in 0.5 seconds - about once every other frame). If I hang the clothes in my studio (not in the bathroom), then they dry in about one day or less, depending on the humidity. It takes much longer if I hang them in the bathroom.
Update (November 2007): This machine is still running. After a year, here are my comments:
After getting tired of the drain tube clamp falling out, I made two small wedges out of a folded-up credit card to hold the clamp in place.
I made a third spill (and this one was a big one): once, the gooseneck drain hose came apart from the U-shaped drain-pipe hook. So, now I check that connection every week or so.
I always run an extra rinse cycle (or two). If I have time, during the spin cycles, I lower the drain tube to allow more sudsy water to drain out. (This is a high-maintenance tactic, though --- it can lead to floods if you're not careful.) Some types of clothes absorb and retain more water (and detergent) than others, and my skin is better after more of the detergent is rinsed out. You can take just-washed clothes from a standard washing machine and re-rinse them here to check how much detergent is left.
Update (April 2008): In the past two months, I have had two more major spills. Both times, it seems that the water-level sensor got stuck and failed to tell the inlet valve to shut off. When this happens, the water overflows the tub and comes out the bottom of the machine. (Usually, you hear a click when the water level is reached, and then the valve shuts off; but in these cases, the first click never occurs.)
Now that I live in an apartment building with a good laundry room, I use this washer mostly for small items: socks, underwear, undershirts.
Update (April 2009): It turned out that the water-level sensor had failed. The sign of impending failure is that the sensor will sometimes fail to close the valve when set to "high", but will always close at "low" and "medium" water levels. Then, "medium" will stop working and the valve will only close when the water level is set to "low". Since the manufacturer's warranty had expired, I had the part replaced under my credit-card-based extended warranty program. Haier suggested two authorized repair operators; one of them said that they didn't service this model. The other did, and charged $85 (diagnostic service call) plus $60 (labor) plus $21.52 (part). The part had to be ordered and took about five weeks (!) to arrive.

Click Here to see more reviews about: Haier HLP21N 6.6-Pound Pulsator Wash with Stainless Steel Tub

Perfect for a small apartment or dorm room, this compact pulsator washing machine will help save on money and time wasted at the laundromat. The machine's 1-1/5-cubic-foot stainless-steel tub holds up to 6-3/5 pounds of laundry, and it connects to the kitchen sink in just five steps thanks to the included quick-connect sink adapter. Even more, the washer's smart technology and electronic controls allow for selecting the wash setting and water level to ensure a perfect load every time. Choose from three water levels based on the size of the load--save water by choosing a lower level for smaller loads. The unit's standard wash cycles include normal, heavy duty, whites, soak, and delicate; its special wash cycles include hand wash, sanitary, and unique or exclusive. The washing machine delivers a maximum spin speed of 740 rpm and its cycle status lights, estimated time-remaining display, and end-of-cycle signal provide added convenience. Other thoughtful details include a removable lint filter, a side strap for easy mobility, and an adjustable leveling leg to balance the machine if it rests on uneven ground. Fill and drain hoses come included. The washing machine measures 17-1/4 by 17-19/32 by 29-29/32 inches and carries a one-year warranty.

Buy cheap Haier HLP21N 6.6-Pound Pulsator Wash with Stainless Steel Tub now.

Aqua-Pure AP200 Under-Sink Water Filter System Review

---

Average Reviews:

(More customer reviews)I wanted to give the Aqua-Pure a try before spending a fortune on a reverse osmosis system that would also take up all the space under the sink. To my relief, and a bit of a surprise, it actually works. I can compare the unfiltered to the filtered and there is a huge difference. And, it takes up little space.
Water companies have different issues to deal with in various areas of the country. Not far from here, my mother had a terrible iron problem, and I have none to deal with. I would imagine that a simple system like the AP200 might work in some areas and not others. If the water is really terrible, then perhaps only a more complex system would work and maybe not even then.
So, it works perfectly for me, but I do have issues. First, it is really expensive for what it is! This is a simple plastic device, two pieces and a gasket. $92 is a lot for that.
The filter screws into the housing. Since it is plastic, I have always been careful, but once I did find that the filter had broken off at the threads. This required taking everything out and doing something clever to remove the broken-off part from the housing.
Did I screw it in too tightly? Hmmm, I'm pretty careful about such things. I would hate to think it broke from normal water pressure or some sort of surge. I have no water hammer problem. In any case, it isn't very durable and takes too much care to install the filter cartridge.
The better news is that the filters come two in a box. Amazon's description makes it seem like you are only getting one for almost $50. Since they last me at least a year, that is only $25/year, which isn't too bad.
As with any filter, you do have to tap into the plumbing under the sink. That gets you into the world of plumbing and those who have been there know that there is little standardization and lots of options.
Again, as with any filter, you really have to use a separate faucet. Running all your cold water through this filter would shorten its life considerably and at only 2 GPM, the flow would be really slow.
I put my system in when I changed the sink and I bought one that had a hole in it for a separate faucet. Some homes have the faucets coming through the counter, but drilling would still be necessary.
In my area, and my circumstances, the Aqua-Pure turns out to be a fine option. We don't buy bottled water, the coffee and ice cubes are better and we use it to cook in. The regular water goes to the dishwasher and for sink duty.
So, I think it works just fine in most situations, takes up little room and is easier to install that some other systems. It is too expensive and fragile to get the coveted five stars, so it gets three.

Click Here to see more reviews about: Aqua-Pure AP200 Under-Sink Water Filter System

Aqua-Pure AP200 Plastic Taste and Odor Removal Filter for AP217Aqua-Pure; brand offers a complete line of water filtration and water treatment products to provide you and your family with clean, safe, great tasting water. Aqua-Pure is the choice of quality conscious plumbing professionals; builders, and specifiers around the world.Aqua-Pure systems are considered by professionals to be the best on the market. To be sure your system is in top working order, you should check your filter cartridge every 4 - 6 months to see if they need replacing. Aqua-Pure AP200 Plastic Taste and Odor Removal Filter for AP217 Features:; Double Action for Dirt, Rust, Chlorine Taste and Odor Reduction ; 5 Micron Nominal ; Cartridge Contains a Pre & Post Filter with Activated Granular ; Carbon for Maximum Effectiveness ; Long Life Graded Density Depth Filtration ; Manufactured from FDA CFR-21 Compliant Materials ; Cuno AP200* Image is of AP217 model

Get 42% OFF

Buy cheap Aqua-Pure AP200 Under-Sink Water Filter System now.

Franke : HT200 Heating Tank & Connector for Little Butler Review

---

Average Reviews:

(More customer reviews)I agree with Mr Vaughn. This is my third replacement in 5 years. The first failed after 2 years, leaking and destroying my brand new cabinet floor. This one is now disintegrating and white material in now in the hot water. Zero customer service from the mfgr. Thanks to Mr Vaughn's review I will search for a replacement from another manufacturer. By the way, i am dissatisfied with all the Franke products (deep double ss sink that stains like crazy, expensive designer faucet that broke in less than 2 years, and the infernal Butler) that I installed in my $100,000 kitchen.Franke : Triflow Series TFT389 Traditional FaucetFranke : Triflow Series TFT400 Traditional Faucet

Click Here to see more reviews about: Franke : HT200 Heating Tank & Connector for Little Butler

Required for all The Little Butler Series faucets.Franke Heating Tank, Model HT200Features Franke Heating Tank for Little Butler Water DispensersApproximate Weight Shipping 7 lbs

Get 30% OFF

Buy cheap Franke : HT200 Heating Tank & Connector for Little Butler now.

Aquasana AQ-4000 Countertop Water Filter Review

---

Average Reviews:

(More customer reviews)Filters are much more difficult to install than I think they should be, unit consistently breaks or has a problem every few months. The white plastic filter housing has broken twice (see photo) and I've had to replace the faucet/dispenser at least once because it constantly dripped or even poured. I am now on hold to get another part since I am a "Water 4 Life" subscriber for about $100 year - which includes two filter changes and warranty. Eventually I will probably spend the time and money to get a better unit.
UPDATE 2008-11-29: After the water filter housing broke a third time, I requested that they send me another one for free which they did (no shipping charge) (I am a Water4Life customer). They seem to have redesigned this part so hopefully it will not break again.

Click Here to see more reviews about: Aquasana AQ-4000 Countertop Water Filter

Replacement Cartridge Set for Aquasana AQ-4000. Cartridge Model#: AQ-4025

Buy cheap Aquasana AQ-4000 Countertop Water Filter now.

Danby DKC645BLS 5.8-Cu.Ft. Designer Beer Keg Cooler, Black/Stainless Review

---

Average Reviews:

(More customer reviews)Out of the box, this unit will not function correctly. You will have serious problems with foaming beer because of 3 defects.
1. Temperature regulator does not sense liquid temperature. It is also located too close to the cooling plate and needs to be moved further away to get a more accurate reading.
2. The tower does not flow cool air and ambient temperature inside is much higher than it needs to be
3. The spigot is also non-conventional and doesnt encourage an even flow
As far as I know, mine doesnt make any noises at all so I'm not sure what the other review is referring to or if they have a unit that isnt working correctly.
All of the above problems can be corrected.
Temperature -
a) Purchase a new regulator and bypass danby's.
b) Move the sensor away from its current position and put it in water to get a more accurate "liquid" reading.
Tower - Install a small fan to circulate air into the tower
Spigot - Replace with a standard one
Unfortunately for Amazon reviews, i cant link to other information that will help you do all of this, but if you search for the name of the unit, links that will help, show up very high in the list.

Click Here to see more reviews about: Danby DKC645BLS 5.8-Cu.Ft. Designer Beer Keg Cooler, Black/Stainless

The Danby DKC645BLS 5.8 Cu. Ft. Designer Beer Keg Cooler takes beer drinking to a whole new level. With room for full or pony sized kegs, this cooler also converts to a 5.8 cu. ft. all refrigerator for maximum versatility. It features an easy-to-program electronic thermostat, a scratch resistant work top for storing accessories and a stainless steel door with reversible door hinge. Designed for indoor use, this keg cooler is perfect for parties or watching the big game.

Get 5% OFF

Buy cheap Danby DKC645BLS 5.8-Cu.Ft. Designer Beer Keg Cooler, Black/Stainless now.

Under Sink Install Kit for Jupiter Ionizers Review

---

Average Reviews:

(More customer reviews)the install was pretty easy. it's a little plastic-y for my taste hence the one star markdown.
most people can't figure out how to turn it on for some reason. (uh, turn the handle a few inches?) ... very simple. very elegant looking.
i wish the part that holds the faucet to the counter was not so plastic! ... you can't get it tight ... so it moves around quite a bit. ... and if you tighten it down, it will break. (i didn't do that but you can see it will easily strip or break.)
it comes with a black and white part so it should work with many types of counter tops.
i got the brushed which looks good with my stainless steel faucet/sink. ... and it makes the jupiter so much nicer to own. (after you turn off the "melody" it chimes when it turns on! ... argh. that lasted all of 30 minutes before i muted that "feature")

Click Here to see more reviews about: Under Sink Install Kit for Jupiter Ionizers

This under sink installation kit allows Jupiter Melody water ionizers to be installed below kitchen counter. Includes faucets for above the counter installation that come in chrome or brushed nickel. This kit cannot be replaced with regular undercounter water filter kit, because there are 2 water outputs from Melody - low pH and high pH. This kit is designed for Melody only, will not work with Microlite!Available in: Chrome, Brushed Chrome, Brushed Nickel, White or Brass

Buy cheap Under Sink Install Kit for Jupiter Ionizers now.

Stiebel Eltron Mini 3 Electric Tankless Water Heater, 110-120 Volt, 3.0 kW Review

---

Average Reviews:

(More customer reviews)I have to eat this one because Crogan will not accept a return, which by the way, I could not find anywhere in writing. For that reason alone I would not purchase any product from this supplier. I had very realistic expectations for this little heater. All I wanted was warm water to wash my hands and face in a small sink. Even with the low flow aerator this product was unacceptable and I immediately removed it. Please note that the owner of Crogan has put in a review--which is not true.

Click Here to see more reviews about: Stiebel Eltron Mini 3 Electric Tankless Water Heater, 110-120 Volt, 3.0 kW

Stiebel Eltron Mini 3 Tankless Electric Water Heater - 110 - 120 VoltThe Stiebel Eltron Mini; tankless water heaters are designed for installation at the point-of-use. The Mini; heats water instantaneously as it flows through the unit. Stand-by heat-losses are completely eliminated. The efficient heating elements are controlled by a simple flow switch. Additionally, all Mini; water heaters are equipped with a safety high-limit with automatic reset.The combination of meticulous German engineering and the best available materials ensure that every Mini; is of the highest quality and designed for many years of trouble-free service. Nobody can compare with our exceptional reliability record and customer support services!The Mini; 3, and Mini; 4 models ship with a 0.5 GPM pressure compensating flow reducer / aerator that fits most faucets. Flow controls and faucet aerators are highly recommended in conjunction with tankless water heaters. No pressure relief valve*, drains, or circulating pumps are needed.The Stiebel Eltron Mini; tankless water heaters are ideal for restrooms or kitchenettes in an office or commercial / industrial setting: Office Buildings, Gas Stations, Stores, Schools, Malls, Hotels / Motels, Warehouses, Commercial Condominiums, Restaurants, Manufacturing FacilitiesIn a residential setting, they are suited for the following applications: Bathroom Sinks, Kitchen Sinks, Laundry Areas, Small Cabins, Boats / RVsStiebel Eltron Mini 3 Tankless Electric Water Heater Features:; Extremely compact design saves space; Major energy savings; Unlimited supply of hot water; Proven reliability; Sleek design is appealing and can be mounted in plain sightStiebel Eltron Mini 3 Tankless Electric Water Heater Specifications:; Phase: 1; Voltage: 110 - 120; Wattage: 3.0; Amperage: 25; Min. required circuit breaker size: 30 A; Recommended wire size: 10 AWG coppper ; Min. water flow to activate unit: 0.53 / 2.0 GPM/Lmin ; Degree of protection according to IEC 529: IP

Get 19% OFF

Buy cheap Stiebel Eltron Mini 3 Electric Tankless Water Heater, 110-120 Volt, 3.0 kW now.

Crystal Quest Portable 10-stage Reverse Osmosis System Review

---

Average Reviews:

(More customer reviews)Having grown tired of the bottled water scene; the expense, the drain on the environment from shipping and all the plastic containers, I was looking for a high quality product that was simple to setup. I also wanted something that I could take with me on extended trips to guarantee I always have high quality pure water available.
This product has thus far fit the bill. Reverse-osmosis is considered one of the best filtration systems available, filtering many more particles than charcoal, as well as many heavy metals and other elements frequently found in municipal water systems. While, I haven't used it anywhere other than my apartment, it was very easy to install and fits all of my current needs.
The only issue I have is that the dispenser spout attaches directly to the unit, making it difficult to store or mount out of the sight. However, it is considered a portable unit, and I'm sure that could be remedied by a trip to your local hardware store.

Click Here to see more reviews about: Crystal Quest Portable 10-stage Reverse Osmosis System

The Crystal Quest 10 stage portable reverse osmosis system will provide you with 50 gallons per day of quality contaminate free water. It is very convenient to use and hooks up to the sink faucet. The Crystal Quest portable reverse osmosis system is great for homes and apartments as there is no plumbing involved. Or people that stay in motels a lot, it is also great for the office or if you travel in a recreational vehicle. Or for those that are staying in dorm rooms. Were ever you go you will be assured that you are drinking contaminant free water with a Crystal Quest portable reverse osmosis system. It comes with all the hardware you need to hook it up. In the 1st 3rd 5th and 10th stage water flows through a one micron filter pad to remove suspended particles such as silt, sand, sediment, rust (Giardia, Cryptosporidum) and any other un-dissolved matter. The 2nd and 10th stage water flows coconut shell granulated activated carbon to filter out organic contaminants like chlorine, chemicals linked to cancer (THM's benzene), pesticides, herbicides, insecticides, (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants. 4th stage water flows through Crystal Quest reverse osmosis membrane that removes and filters as small as 1/1000 of a micron. That removes inorganic chemicals like salts, metals, minerals and most microorganisms. It also removes cryptosporidium and giardia, and most inorganic contaminants. In the 6th and 7th stage, water flows through a KDF 55 and KDF 85 media to remove iron-and hydrogen sulfide. It also remove or reduces heavy metals like lead, mercury, copper, nickel, chromium, cadmium, aluminum and other dissolved metals are removed from your water. KDF media also inhibits bacterial growth throughout the entire unit. The 8th stage water flows through an ion exchange resin reducing more of the heavy metals like lead, copper, aluminum and hard water.

Buy cheap Crystal Quest Portable 10-stage Reverse Osmosis System now.